processor 2 in 6 out

Number of inputs: 2 inputs, 1 RTA microphone input

Connector: 2 x XLR bus input, 1 x XLR female RTA microphone input

 Microphone input: electronic balance / RF filter / circuit input level: >50k

Maximum input level (line input): >+ 20 dBu

Common mode rejection ratio: >45dB

Microphone preamp phantom power supply: + 15 volts DC

Analog output:

Number of outputs: 6-wire output

Connector: XLR male plug

Type: Electronic balance, RF filter

 Impedance: 1202

Maximum output level: + 20 dB

Quasi-delay: Up to 10 milliseconds per output channel

A/D performance:

 A/D dynamic range: 24-bit +112dB -110dB with A/D converter with dbx type IVTM conversion system

 Type IV dynamic range: +123 db with transient materials, +22khz, 121 decibels (no weighted materials), 22khz 115 db standard configuration, program materials, +22khz

 D/A converter: 24 bits

Dynamic range: +112db -110db

System performance

Internal processing word length: 32-bit floating point

Sampling rate: 48 khz

Dynamic range: +110 db -107 db

THD+ noise: typical value is 0.003% + 4 dbu, 1 khz, 0 db

Gain frequency response: Crosstalk between signal channels: 20 hz-20 khz, + 0 /- 0. 5 db

Delay: Input and output: 1.847 milliseconds, <- 110 decibels, -120 decibels (input and output: -100 decibels)

Power supplyWorking voltage: 100-120 volts 50/60 Hz or 220-240 volts AC 50/60 Hz power consumption: 22 watts

unit weight:

Net weight: 5.25 pounds. (2.4kg)

Gross weight: 6.75 pounds. (3.1 kg)

Dimensions: 1.75(h) x5.75(d) x19(w)/ 4.4cm(h) x14.6cm(d) x48.26cm(w)"